Lovegodrop

Wanneer voorraad houden — en wanneer het dood kapitaal is

Opslag lost drie problemen op en creëert er één. Het rekenwerk voor een eerste voorraad, de SKU's die nooit stil zouden moeten staan, en de exitconditie om eerst op te schrijven.

Kosten, kwaliteitscontrole en verzending12 min lezen16 oktober 2026Lovegodrop sourcing team

Kernpunten

  • Three reasons to hold: the source disappears, the batch drifts between runs, or the inbound leg is longer than you can promise.
  • Hold single-source, stable-demand, narrow-variant SKUs. Do not hold multi-source commodities, trend goods, or wide variant spreads.
  • Ninety days of included storage removes a fee. The remaining costs are capital, obsolescence, and buying more than the arithmetic supports.
  • Compute the reorder point from your own demand: exposure window demand plus z times the standard deviation over that window.
  • Write the exit condition before the purchase. A hold without an exit is a purchase, not a decision.

The stock you are holding is either insurance or a mistake

A supplier listing vanishes the week your best SKU starts moving, and you spend the next ten days either refunding orders or re-sourcing at a worse price. That is the experience that makes merchants want to hold stock. It is also the experience that makes them hold the wrong stock, in the wrong quantity, for the wrong reason.

Storage is not a strategy. It is insurance against three specific failures, and like any insurance it has a premium you should be able to state before you buy the policy. If you cannot name the failure you are insuring against, you are not holding stock, you are buying inventory and hoping.

The three problems storage actually solves

Problem it solvesWhat it costs you without storageWhat holding costs you insteadWhen the problem is real
Supplier stock-outLost or refunded sales, and a listing that may have to be paused while you find a replacementCapital in units, and the risk that they never sellWhen the source is one seller whose listings disappear for weeks at a time
Batch consistencyReturns, and a review profile damaged by units that do not match the ones the customer sawUnits from one batch, all alike, and the holding cost of that batchWhen shade, finish, print or build drifts between production runs
Lead-time compressionThe customer waits the whole chain: purchase, inbound, inspection, packing, freightThe inbound leg is already done, so only the outbound leg remainsWhen the inbound leg is longer than you are willing to put in front of a customer

The third one is the reason most merchants give, and it is the weakest of the three on its own. Compressing a lead time does not create demand. If a SKU sells steadily, a shorter wait may convert better; if it sells in bursts, the wait was never the constraint.

The first two are the ones worth paying for. A concentrated source is a real risk, because a marketplace listing is not a contract and a seller can take it down without telling you. Batch drift is a real risk, because a customer who received a different shade from the one in the photograph will return it, and the return costs you more than the freight you were trying to save.

Three questions, in order. One yes and the hold is defensible; three noes and it is not.
Three questions, in order. One yes and the hold is defensible; three noes and it is not.

Which SKUs to hold and which should never sit still

ArchetypeHold or notThe rule behind it
Single source, stable demand, narrow variant rangeHoldThe stock-out risk is concentrated and predictable, and the arithmetic below has data to work from
Multi-source commodity, many equivalent listingsDo not holdIf three sellers carry it, a stock-out is a short re-source, not a lost sale
Variant spread wider than six, demand spread across all of themDo not holdPer-variant demand is too thin to carry a safety stock. See the arithmetic below
Seasonal, with a defined windowHold into the window onlyThe exit condition is the end of the window, written before the purchase
Trend-driven with a short cycleDo not holdObsolescence risk exceeds stock-out risk, and the cycle ends before the stock does
Bulky, high volume ratioDo not holdFreight is already a large share of the price, and holding does not change the divisor
Long production lead, made to orderHoldThe lead time itself is the reason, and it will not shorten
New SKU, under thirty days of dataDo not holdYou do not yet have the demand distribution the reorder point needs

Read the rule column rather than the verdict. The verdict is a default for a SKU you have not analysed; the rule is what to apply when your SKU sits between two rows.

What a ninety-day storage window changes, and what it does not

Storage is included for 90 days with us, alongside three QC photos per item, relabelling, repacking and consolidation. That removes one line from the calculation, and it is worth being precise about which line it is.

What it removes: the periodic storage charge. A hold that would have carried a fee for months now carries none for the first 90 days, so the decision collapses onto its real costs.

What it does not remove, and these are the costs that decide the question:

  • Capital. The units are bought and paid for before they are sold. The cost is what that money is not doing elsewhere, plus the concentration risk of having it in one SKU.
  • Obsolescence. The value of the units declines with the season, with a trend, and with any change you make to the listing. A unit that was right in one quarter may be unsellable in the next.
  • The temptation to over-buy. This is the one to watch. A storage fee is a cost signal, and removing it removes the signal. A merchant who would order 50 units when storage is charged will order 200 when it is not, and those extra 150 units are the real cost of the free window.

The discipline that replaces the fee is the arithmetic below plus a written exit. Without one of them, free storage turns a good decision into a large one.

The reorder-point arithmetic for a first hold

Assumptions, stated because every figure depends on them:

  • Average daily demand d = 3 units per day, from your own order history
  • Standard deviation of daily demand σd = 1.5 units per day
  • Lead time L = 12 days: the observed interval from goods approval to the parcel being ready at the warehouse, including inbound, inspection and packing
  • Review interval R = 7 days: how often you look at stock and place a reorder
  • Service level 95%, so z = 1.65
  • Order cycle 30 days

The steps:

  1. Exposure window = L + R = 19 days. Demand over it = 3 × 19 = 57 units.
  2. Standard deviation over the exposure window = σd × √(L + R) = 1.5 × √19 = 1.5 × 4.36 = 6.5 units.
  3. Safety stock = z × 6.5 = 1.65 × 6.5 = 10.8, round up to 11 units.
  4. Reorder point = 57 + 11 = 68 units. When on-hand reaches 68, you place the reorder.
  5. Order-up-to level = reorder point + demand over one order cycle = 68 + 3 × 30 = 158 units. Peak on-hand is around 158.
  6. Check the hold against the storage window: 158 units at 3 per day is 53 days of cover, which sits inside the 90-day window.
  7. Note what the safety stock is: 11 of the 158 units, about 7%, exist purely because demand is uncertain. The other 149 are pipeline stock, and no amount of forecasting removes them.

Two sensitivities worth running before you commit. At a 90% service level, z = 1.28 and safety stock falls to 8.3, cutting the hold by roughly 3 units, about 2% of the total. If lead time doubles to 24 days, exposure becomes 31 days, demand over it rises to 93 units, the window standard deviation becomes 1.5 × √31 = 8.4, safety stock 13.8, and the reorder point rises to 107. Lead time moves the hold far more than service level does, which is why a measured L matters more than a chosen z.

The artefact is a reorder card for the SKU: d, σd, L, R, z, reorder point, order-up-to level, review date. One card, one SKU, revisited at R.

Why variant spread makes a healthy unit count a bad hold

Take the same SKU and spread it across 18 variants, three colours by six sizes, with demand spread evenly.

  • Per-variant daily demand = 3 ÷ 18 = 0.167 units per day
  • Per-variant standard deviation, assuming the variants move independently = 1.5 ÷ √18 = 0.354 units per day
  • Per-variant safety stock = 1.65 × 0.354 × √19 = 1.65 × 1.543 = 2.55, round to 3 units
  • Per-variant reorder point = 0.167 × 19 + 3 = 3.17 + 3 = 6.2, round to 7 units
  • Order-up-to per variant = 7 + 0.167 × 30 = 7 + 5 = 12 units
  • Total across 18 variants = 216 units, against 158 held as one pooled item. The spread costs 1.37 times the stock for the same service level

Now the part that surprises people. At 95% service per variant, the chance that at least one of 18 variants is out of stock at a given moment is 1 − 0.95 to the power of 18. That is 1 − 0.397, so about 60%. Holding 216 units, you will still be missing some variant roughly six times in ten.

And the unit count still looks healthy. 216 units looks like a well-stocked SKU on a dashboard, but 12 units of a variant selling 0.167 per day is 72 days of cover for that variant, while the variants that actually carry the demand sit at two or three. The distribution is wrong, not the total.

The remedy is not a bigger hold, it is a narrower one. Rank variants by demand, take the ones that carry most of the volume, and run the per-variant arithmetic only on those. Leave the long tail to source-on-demand, because for a variant selling one unit a fortnight, the stock-out cost is one order and the holding cost is permanent.

The first-hold procedure, with the exit written before the purchase

  1. Choose one SKU with at least 60 days of sales data at the variant level. Not the SKU you like, the one with data.
  2. Compute d and σd from your own order history at the variant level, not at the SKU level.
  3. Measure L yourself: days from goods approval to the parcel being ready. Use an observation, not an expectation.
  4. Choose a service level you can finance, and write down its z. 95% is 1.65, 90% is 1.28.
  5. Compute the reorder point and the order-up-to level, and write them on the reorder card with the review date.
  6. Write the exit condition before you buy anything. A usable one names a measurement and a date: "If fewer than 90 units have sold by the review date 60 days out, the remainder is repriced and no reorder is placed." Write the number in before you know whether you will like it.
  7. Buy the first hold at the order-up-to level, set the review in the calendar, and do not look at it again until that date.

The artefact is two documents: the reorder card and the exit condition. The second is the one merchants skip, and it is the one that decides whether the hold was a decision or a purchase.

Signals that you should stop holding

SignalWhat it meansWhat to do
Sell-through below the reorder point for two consecutive review intervalsDemand moved, inventory did notStop reordering and run the exit condition
A second source appears with an equivalent listing and a stable priceThe risk you insured against has goneLet stock run down, do not reorder
The batch you hold drifts from what the supplier ships nowThe consistency reason has invertedStop shipping from stock until the listing is corrected
Units still on hand at day 60 of the storage windowThe hold exceeded demandApply the exit now, while there is window left
Returns citing a difference between the unit and the listingListing and batch have divergedPause the hold and fix the listing first
Variant spread has grown since the hold was placedPer-variant cover fell without the total changingRe-run the per-variant arithmetic before any reorder

The second signal is the easiest to miss, because nothing bad happens when it appears. The hold keeps working, the stock keeps selling, and you keep reordering for a reason that stopped being true. Re-run the three tests from the top of this article at every review date, not only when something goes wrong.

Veelgestelde vragen

Is ninety days of included storage enough to make holding free?

No. It removes a fee line. The remaining costs are the capital tied up in the units, obsolescence, and the extra units you buy because nothing is charging you to hold them.

Should I hold a SKU that sells in bursts?

Usually not. Bursty demand has a high standard deviation relative to its mean, so the safety stock the arithmetic asks for is large and sits idle between bursts. Source on demand and accept the lead time.

What service level should I choose?

Pick the one you can finance, then check what it costs. Moving from 95% to 90% cut the hold by about 2% in the example, while doubling the lead time raised it by roughly a third. Measure L before you optimise z.

Can I hold stock across many variants if the total looks right?

The total is not the constraint. Eighteen variants at 95% each still leaves roughly a 60% chance that some variant is out of stock at a given moment. Hold the variants that carry the demand.

What if the supplier changes the batch while I am holding?

That is the signal to stop, and it is why the exit condition exists. Stop shipping from stock, correct the listing to match what is arriving, and decide whether the hold is still the right units.

Wat deze week te doen

  1. Pick your highest-volume SKU and write d and σd at the variant level from the last 60 days of orders.
  2. Measure L on one real order: the days from goods approval to the parcel being ready.
  3. Run the seven-step arithmetic and write the reorder point and order-up-to level on one card.
  4. Write the exit condition now, with a number and a date, before you place any hold.
  5. Re-run the three tests on every SKU you are currently holding, and stop the ones that fail all three.

Geschreven en onderhouden door het sourcingteam van Lovegodrop. Hoe deze pagina's worden geschreven en gecontroleerd.

Begin met een order die u al heeft verkocht

Verbind een Shopify- of WooCommerce-winkel, kies een betaalde order en bekijk de inkoop- en verzendofferte voor precies die order voordat u iets vastlegt.

Lees ook